Fortsätt till huvudinnehåll

[VAWT] Affordable wind measurements

The shop Clas Ohlsson in Sweden sells a spare anemometer for the  WH-1080 weather station for a hobbyist friendly price around 15 euros. This anemometer can probably be found in other countries too.

50-8885 Vindhastighetsgivare
The WH-1080 spare anemometer

Here  you can read about how to use this anemometer together with an Arduino or any other embedded system. 

As we couldn't find any data on the characteristics of this sensor, we did our own calibration in a wind tunnel and the results are presented in the report above. This anemometer was used in a Bachelors Thesis project related to the devlopment of optimization of the Savonius Turbine, here tagged [VAWT].

Kommentarer

  1. Unknown27 mars 2018 kl. 03:09

    Hej.
    Jag är i liknande situation där jag behöver en billig vindhastighetsmätare till mitt kandidatarbete. Jag tänkte försöka återskapa den som ni har byggt och undrar om det skulle vara möjligt att få den Arduinokod ni använde i det faktiska projektet?
    Då detta är en mindre del av arbetet skulle det ta för mycket tid att konstruera mätaren från grunden.

    Hälsningar
    Michael

    SvaraRadera

Skicka en kommentar

Populära inlägg i den här bloggen

[VAWT] Plausible improvements of the Savonius windmill

Cut a barrel in half, mount it on a shaft and you have a windturbine. If the barrel is used, then what else probably would end up on a scrap heap is instead used for converting renewable energy. Simplicity and low cost makes this an attractive option especially for societies with limited economy and a malfunctioning or non existing electric grid. Small off-grid electrical networks can be built and people who perhaps most needs electricity get that. Isn't that neat? Savonius (from http://solarvan.co.uk/savonius) An overlooked potential? The Savonius though has a widespread reputation of having low effiency and is often dismissed as a credible option around forums and in formal litterature. However, when looking at the graph below from a publication Wortman did 1983, the effiency can be realtively high provided that the TSR(Tip-to-Wind-Speed-Ratio) is held at a correct value and the windmill should work quite nicely. In practice this could probably be done by controlling t
Skicka en kommentar
Läs mer

The heating system

One of my former projects was the design and practical realization of an automated wood fired heating system. Two key characteristics of the project were the reuse of junkyard bargains and realization of electronic system starting from component level. Budget was kept low. The system is now warming a house situated on a farm on the Swedish countryside.  I for sure have never done a project spanning so many different categories of work. In the end I had done manual metal work and welding, plumbing, electrical installation, creation of control- and calculation algorithms, circuit design and programming to name some. A box on the upper floor of the house with an Atmega328 microprocessor controls the whole heating  system.   Here is a video summary of the project: Systems furnace is a Braland 21 from http://www.braland.se The control system that is now up and running can among other things monitor 16 different temperatures, control all the systems pumps and do diffe
2 kommentarer
Läs mer